Shockwave H202

Hydrogen Peroxide Disinfectant

SKUs: 8318; 8318CAN (Canada) Categories: , ,

Packaging Types:

1 Gallon
4 Liter
Where to Buy

Description

Our EPA Category IV disinfectant, cleaner and odor neutralizer is effective in all restoration and remediation applications. Designed for general cleaning and disinfecting of hard, non-porous environmental surfaces, it cleans quickly by removing dirt, grime, mold, mildew and other common soils found in hospitals, nursing homes, schools and colleges, medical, dental offices and life science laboratories.

Features

  • Cleaner, disinfectant and broad spectrum sanitizer
  • Hydrogen peroxide breaks down to water and oxygen
  • Tuberculocidal
  • No PPE required
  • Low odor and dye free

How to Use

FOR USE AS A CLEANER AND/OR DEODORIZER

Apply to surfaces by spray, cloth, sponge, or mop. Wipe surfaces dry or rinse.

FOR USE AS A ONE-STEP CLEANER/DISINFECTANT PRODUCT

  1. Pre-clean heavily soiled areas.
  2. Apply solution by spray, cloth, disposable wipe or mop to hard, non-porous environmental surfaces.
  3. All surfaces must remain wet for 1 minute. Use a 5 minute contact time for TB and a 10 minute contact for fungi.
  4. Wipe surfaces dry or rinse.

TO KILL FUNGI

Pre-clean heavily soiled areas. Apply ShockWave Hydrogen Peroxide Disinfectant and Cleaner with a cloth, micro beer cloth, sponge, mop or trigger sprayer to completely wet surface. Allow the surface to remain wet for 10 minutes. Wipe surfaces dry or allow to air dry.

BROAD SPECTRUM NON­FOOD CONTACT SANI­TIZER

Apply to hard non-porous surface; allow to remain wet for 30 seconds.  Wipe dry. No rinsing is required. For heavily soiled areas a pre-cleaning is required.

OR USE TO CLEAN AND DISINFECT LIFE SCIENCE LABORATORY SURFACES, INSTRUMENTS AND GLASSWARE

  1. Pre-clean heavily soiled areas.
  2. Apply solution by spray, cloth, disposable wipe or mop to hard, non-porous environmental surfaces or completely immerse pre-cleaned glassware and compatible instruments in the solution.
  3. Immerse or allow the surface to remain wet for 1 minute. Use a 5 minute contact time for TB and a 10 minute contact for fungi.
  4. For glassware/instrument: Rinse surface thoroughly and let air dry before reuse. For surfaces: Wipe surface dry or rinse.
  5. Change immersion solution after each use.

Safety & Technical Data Sheets

Product Documents