Description
ABC Fiberspray uses the same effective formula as ABC Asbestos Binding Compound, offered in a convenient, airless spray can. ABC Fiberspray minimizes asbestos fiber release and conveniently permits application of the encapsulant from any position, even upside down.
How to Use
APPLICATION INFORMATION
ENCAPSULATION
Use ABC FiberSpray to effectively encapsulate small areas of asbestos containing material (ACM).
GLOVEBAG USE
Place ABC FiberSpray in the pouch within the glovebag. Apply ABC FiberSpray to seal the friable pipe insulation ends after the insulation has been removed. Use ABC FiberSpray to “lockdown” residual microscopic fibers to the substrate.
BULK SAMPLE REPAIR
Apply ABC FiberSpray to friable areas after bulk samples have been removed from the ACM or suspected ACM.
PREPARATION
Shake well before spaying. If nozzle orifice is clogged, remove the dried film from the cap or replace with an extra nozzle (provided upon request).
APPLICATION
Apply ABC FiberSpray by spraying the surface from a distance of 8 to 12 inches.
CLEANUP
Clean the nozzle with warm soapy water before the coating dries.
PRECAUTIONS
Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). Approved respirators must be used to prevent inhalation of asbestos fibers that may be present in the air. Protective clothing should be worn. Tools and drippings should be cleaned immediately with clean, soapy water before the coating dries. Careful consideration should be given to all Environmental Protection Agency (EPA), OSHA and state regulations in effect at the time of application of ABC FiberSpray.