 |
ShockWave (8310)
NOW AVAILABLE IN READY TO
USE!!!
ShockWave is a concentrated, EPA-registered, quaternary ammonium chloride cleaner, that disinfects hard, nonporous surfaces, and also sanitizes porous and semi-porous surfaces subject to microbial contamination. ShockWave is available in 1-gallon jugs and convenient 10-ounce bottles, the proper amount for five gallons of usable product.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
NEW!!! ShockWave RTU (8316)
ShockWave RTU is a ready-to-use, EPA-registered, quaternary ammonium chloride cleaner, that disinfects hard, nonporous surfaces, and also sanitizes porous and semi-porous surfaces subject to microbial contamination. ShockWave
RTU is available in both 5 gallon and 1 gallon jugs.
Product Data Sheet
Material Safety Data Sheet
(MSDS)
|
 |
AfterShock (8390)
AfterShock is an EPA-registered fungicidal coating designed to kill residual mold growth after pre-cleaning contaminated surfaces. AfterShock is a durable, 100% acrylic white coating that can be applied to common building materials including wood, OSB, drywall, concrete, and metal surfaces.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
|
IAQ 1000 (8315)
IAQ 1000 is a hydrogen peroxide based biodegradable, chlorine free cleaner.
IAQ 1000 is pH-neutral, and contains an agent that will whiten and brighten
while cleaning, but does not contain sodium hypochlorite (bleach). IAQ 1000 is
suitable for use in water damage restoration situations to remove odor causing
mold, mildew, bacteria, and other microbial growth on porous and semi-porous,
and non-porous materials.
Product Data Sheet
Material Safety Data Sheet
(MSDS)
|
 |
IAQ 2000 (8320)
After cleaning infested surfaces of all visible mold, treat with Fiberlock IAQ 2000 concentrated fungicide/disinfectant to kill any mold remaining on affected surfaces.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
IAQ 2500 (8325)
If desired, use IAQ 2500, the premixed version of our fungicide/disinfectant. Eliminates the need to dilute on-site, as well as improper dilution.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
IAQ 3000 (8330)
For porous masonry surfaces, apply a coat of Fiberlock IAQ 3000 acrylic block filler to provide a smooth surface for the mold resistant coating.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
IAQ 4000 (8340)
On metal surfaces, a coat of Fiberlock IAQ 4000 acrylic DTM primer will prevent rust stains from migrating through to the finished surface.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
IAQ 5000 (8350)
On bare wood, apply a coat of Fiberlock IAQ 5000 acrylic stain-blocking primer to seal the wood and to prevent wood stains from migrating through the coating system.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
|
 |
IAQ 6000HD (8362)
IAQ 6000HD is a heavy-duty, high viscosity, high build version of IAQ 6000 that will bridge porous building materials. Fiberlock IAQ 6000HD contains dual EPA-registered fungicides that will prevent mold from growing on the surface of the cured coating film.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
IAQ 6040 (8363)
IAQ 6040 is a low-viscosity, translucent violet sealant designed to seal new construction materials and resist fungal growth. IAQ 6040 contains dual EPA-registered antimicrobials that inhibit the growth of mold on the surface of the cured film.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
IAQ 7000 (8370)
If bare metal duct needs to be sealed, use Fiberlock IAQ 7000, a low viscosity coating designed to lock down particulate left on surfaces after cleaning. Fiberlock IAQ 7000 contains an EPA-registered fungicide to prevent mold growth on the surface of the coating. Also available in clear: Fiberlock IAQ 7500 (8375).
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
IAQ 8000 (8380)
For HVAC duct remediation projects, apply Fiberlock IAQ 8000 to seal and resurface cleaned insulation. Fiberlock IAQ 8000 will help strengthen existing insulation material, and also contains an EPA-registered fungicide to prevent mold from growing on the surface of the coating. Also available in black: Fiberlock IAQ 8500 (8385).
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
IAQ 9000 (8395)
Fiberlock IAQ 9000 is a low-odor waterproofing coating that is specially formulated to stop water from penetrating through a variety of interior and exterior surfaces. This latex based formula stops 10 psi of water pressure and reduces radon gas penetration. Fiberlock IAQ 9000 contains an EPA-registered fungicide to help prevent mold from growing on the surface of the cured film.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
