 |
A-B-C Asbestos Binding Compound (6421 White, 6422 Clear, 6423 Green)
When managing asbestos-containing materials used as fireproofing on steel decks or beams, the material is often very porous and 'spongy'. A penetrating coat of A-B-C Asbestos Binding Compound should be applied first in order to bind together the asbestos 'matrix'. A second protective coat, or 'bridging' coat of A-B-C should then be applied to complete the system.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
A-B-C Fiberspray (6410 White)
For spot repairs when asbestos is disturbed, use A-B-C Fiberspray. Its convenient size and design allow it to spray virtually anywhere, and in any direction.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
Lag-Kote (6424 White)
Lag-Kote is an EPA-accepted, high solids coating that makes a final,
impermeable seal on piping, boilers, and breaching.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
Lag-Kote II (6420 White)
When being used in an area with no rust or ultraviolet (UV) exposure, use
Lag-Kote II as your final asbestos encapsulant for pipe coverings.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
Penewet (6450)
When asbestos must be removed, thoroughly wet the material first with Penewet surfactant.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
Fiberset PM (7470 White, 7475 Clear, 7480 Blue)
After asbestos has been removed, surfaces should be "locked-down" with Fiberset PM, sealing any residual asbestos fibers to the surface.
Product Data Sheet
Material Safety Data Sheet
(MSDS)
|
 |
Hot-Kote 2200 (6419)
When working with high temperature pipes (above ~250 °F), use Hot-Kote 2200 high-temp lockdown to encase any residual asbestos fibers after insulation removal.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
 |
Grip-Tack (6408)
When complete building demolition is projected, prevent fibers from becoming airborne by spraying all your surfaces with
Grip-Tack. Its tacky finish helps trap any fibers and prevents them from contaminating the environment.
Grip-Tack can be also be used to lock down asbestos fibers after removal; it's tacky finish will help trap airborne particles as they contact the surface of the film.
Product Data Sheet
Material Safety Data Sheet (MSDS)
|
